Sale!

Loose Ring Ball Link Snaffle 5.75ins Ref: 4070-179

$24.99 $18.00

Size: 5.75
Diameter: 23 mm


Ball Link Snaffle

The ball link of this bit sits directly on the horse’s tongue. While the nutcracker effect is lessened, there is more pressure on the horse’s tongue. This bit is slightly more severe than a French link, but less than a Dr. Bristol as there is no edge on the link to press into the tongue.

1 in stock

Description

Loose Ring Snaffle Bit

The loose ring snaffle is one of the most common types of snaffle cheeks, and generally considered to be the best style of cheek for disciplines requiring sensitive contact through the reins, such as dressage.  Because the ring-shaped cheek pieces are attached to the bit by running through holes bored into the ends of the mouthpiece, the mouthpiece to move freely in relation to the rings.  This allows the mouthpiece to move more independently with the tongue and jaw movements of the horse, even when the reins are maintaining pressure on the bit.  This is generally considered an advantage in disciplines like dressage in that it encourages a relaxed jaw and mobile tongue, but some horses can find this freedom overly stimulating and get too playful with the bit, especially when there is no rein contact helping to stabilize the bit.  The rings are also able to swivel freely in a lateral direction, allowing for clear transmission of direct rein aids, which is particularly useful with young horses.  Most cheeks used in snaffle bits are able to swivel laterally, but as the name suggests, the loose ring has the least resistance in this respect.

There are two possible downsides to the loose ring snaffle that may be relevant in certain cases.  Firstly, the gap between the rings and the holes in the mouthpiece can pinch horses with sensitive loose-skinned lips.  This can be a particular problem if the bit is sized too small for the width of the mouth, or if the holes in the mouthpiece are poorly bored such that they have sharp edges or are significantly larger than the rings going through them.  Secondly, the rings provide only limited resistance when the bit is pulled laterally through the mouth, and when pulled hard, the bit can go right through the mouth, rings and all.  The larger the rings, the less of a problem this is, which is why special training bits are made with extra large rings.  With more advanced horses who do not need significant help from the bit when turning, smaller rings are generally fine.

Information from thebitguide.com